It appears that your cart is currently empty
Telephone +34 917054889
Fastfire BronzeClay 100 grs
The Fastfire Bronzeclay
Modeling clay, composed of metal particles, which after modeling if we bake it remains hard as metal, making it a fantastic material for making jewelry and easily customizing our pieces.
Unlike normal Bronzclay, the baking time is shortened and we can work a little faster.
We can bake the pieces in about 2 h or less.
We can make sculptures, jewelry and other objects.
The material is reduced by 17 to 20% after firing.
Instructions for use:
1) Open the vacuum pack and remove the piece of clay.
2) Condition the piece of clay with a little distilled water or another type of oil. We can condition our hands for this task.
3) Once the piece is finished, we must let it dry before baking it, we can put it on a radiator or some low-temperature heat emitter, we can also use a small dehydrator.
We must bake the bronzclay inside activated carbon, this will reduce the oxidation of the pieces. We can fire several pieces leaving a space between them with activated carbon. We do not recommend that parts touch the metal container directly. We can use a stainless steel container to put the active carbon and our bronzclay designs.
4) Baking times, for pieces of 3 mm or less thickness, we can set a cooking ramp up to 829ºC per hour and keep at that temperature for another hour. The total time will be about 2 hours or less.
For smaller pieces we can reduce the firing ramp to 815ºC and maintain it above 807ºC.
5) Once the piece is fired, it can be sanded, burnished, patinated or soldered with traditional materials for jewelers.
Related products
Bronze Clay Modeling clay, made up of metal particles, which after modeling if we bake it remai...
Bronze Clay Modeling clay, made up of metal particles, which after modeling if we bake it remains hard as metal, making it a fantastic material for making jewelry and easily customizing our pieces. We can make sculptures, jewelry and other objects. The material shrinks by 17-20% after firing. Instructions for use: Open the vacuum container and remove the piece of clay. Condition the piece of clay with a little distilled water or another type of oil. We can condition our hands for this...
€24,00
copperclay Copprclay modeling clay, composed of metal particles, which after modeling if we ba...
copperclay Copprclay modeling clay, composed of metal particles, which after modeling if we bake it remains hard as metal, making it a fantastic material for making jewelry and easily customizing our pieces. We can make sculptures, jewelry and other objects. The material is reduced by 17 to 20% after firing. Instructions for use: 1) Open the vacuum pack and remove the piece of clay. 2) Condition the piece of clay with a little distilled water or another type of oil. We can condition ou...
€22,00
Bronze Clay 200grs Modeling clay, made up of metal particles, which after modeling if we bake ...
Bronze Clay 200grs Modeling clay, made up of metal particles, which after modeling if we bake it remains hard as metal, making it a fantastic material for making jewelry and easily customizing our pieces. We can make sculptures, jewelry and other objects. The material shrinks by 17-20% after firing. Instructions for use: Open the vacuum container and remove the piece of clay. Condition the piece of clay with a little distilled water or another type of oil. We can condition our hands ...
€44,00
Prometheus® Bronze Clay is a clayey material that turns into solid, pure bronze when fired in a k...
Prometheus® Bronze Clay is a clayey material that turns into solid, pure bronze when fired in a kiln. It is a mixture of micron-sized bronze powder, water, and organic binder. It can be formed by hand, rolled into a sheet or a string. It can be shaped, textured, even turned on the potter's wheel. Prometheus® Bronze Clay can be used with most lab-created gemstones (cubic zirconia), pre-tested natural stones, glass beads, ceramic, porcelain and Metal Clays. Prometheus®. When PBC® is fired in...
€20,00